Synthetic access to diverse thiazetidines via a one-pot microwave assisted telescopic approach and their interaction with biomolecules.

A one-pot microwave assisted telescopic approach is reported for the chemo-selective synthesis of substituted 1,3-thiazetidines using readily available 2-aminopyridines/pyrazines/pyrimidine, substituted isothiocyanates and 1,2-dihalomethanes. The procedure involves thiourea formation from 2-aminopyridines/pyrazines/pyrimidine with the substituted isothiocyanates followed by a base catalysed nucleophilic attack of the CS bond on the 1,2-dihalomethane. Subsequently, a cyclization reaction occurs to yield substituted 1,3-thiazetidines. These four membered strained ring systems are reported to possess broad substrate scope with high functional group tolerance. The above synthetic sequence for the formation of four membered heterocycles is proven to be a modular and straightforward approach. Further the mechanistic pathway for the formation of 1,3-thiazetidines was supported by computational evaluations and X-ray crystallography analyses. The relevance of these thiazetidines in biological applications is evaluated by studying their ability to bind bio-macromolecules like proteins and nucleic acids.

An in silico approach to investigate the theranostic potential of coumarin-derived self-immolative luminescent probes.

Till date the challenge exists in the treatments of cancer for various reasons. Most importantly, the available diagnostics are expensive with research gap for enhancing the cancer detection sensitivity. Herein, a series of coumarin-derived fluorescent theranostic probes are reported that can serve as potent anticancer agents as well as in the detection of cancer cells. The potential of these probes to efficiently block one of the well-known cancer drug targets NADPH quinone oxidoreductase-1 (NQO1) is evaluated through various pharmacokinetic methods including absorption, distribution, metabolism and excretion (ADME) properties evaluation, PASS (prediction of activity spectra for substance) algorithm along with molecular docking and dynamic simulations. Further the luminescent properties of these molecules were evaluated by investigating their electronic properties in the ground and excited states with the help of density functional theory methods. Results indicate that the proposed molecules can potentially block the NADPH (reduced form of nicotinamide adenine dinucleotide) binding site of NQO1, thereby inhibiting the activity of the enzyme to ultimately disrupt the metabolism of cancer cells.

Click-derived multifunctional metal complexes for diverse applications.

The Click reaction that involves Cu(I)-catalyzed azide-alkyne cycloaddition (CuAAC) serves as the most potent and highly dependable tool for the development of many complex architectures. It has paved the way for the synthesis of numerous drug molecules with enhanced synthetic flexibility, reliability, specificity and modularity. It is all about bringing two different molecular entities together to achieve the required molecular properties. The utilization of Click chemistry has been well demonstrated in organic synthesis, particularly in reactions that involve biocompatible precursors. In pharmaceutical research, Click chemistry is extensively utilized for drug delivery applications. The exhibited bio-compatibility and dormancy towards other biological components under cellular environments makes Click chemistry an identified boon in bio-medical research. In this review, various click-derived transition metal complexes are discussed in terms of their applications and uniqueness. The scope of this chemistry towards other streams of applied sciences is also discussed.

Photophysical evaluation on the electronic properties of synthesized biologically significant pyrido fused imidazo[4,5-c]quinolines.

A single pot microwave assisted method was employed to synthesize a series of novel pyrido fused imidazo[4,5-c]quinolines. The electronic properties of these derivatives were investigated by following their photophysical behaviour under isolated and solvated conditions via computational and experimental approaches. The solvatochromic effect of these derivatives was investigated in the ground and excited singlet states by following the absorption and fluorescence emission and excitation spectra. Further the effect of general and specific solvent effects were also investigated by plotting Stokes shift against Lippert-Mataga, ET(30) and Kamlet-Taft polarity parameters respectively. The deviation from linearity in ET(30) plot indicates that formation of different species in polar protic solvents. The biological applications of these derivatives as potential drug candidates were evaluated by in silico computational methods followed by pharmacokinetic properties predictions. The ability of these derivatives to inhibit human casein kinase 2 (CK2) was evaluated. The structure activity relationships were correlated by evaluating the electronic properties through experimental photophysical investigations including solvatochromic effect and computational electronic structure calculations. Of the various derivatives, p-nitro phenyl substituted pyrido fused imidazo[4,5-c]quinoline exhibited good inhibitory activity against CK2 enzyme and hence could serve as a promising drug candidate.

Design, synthesis and identification of novel coumaperine derivatives for inhibition of human 5-LOX: Antioxidant, pseudoperoxidase and docking studies.

5-Lipoxygenase (5-LOX) is a key enzyme involved in the biosynthesis of pro-inflammatory leukotrienes, leading to asthma. Developing potent 5-LOX inhibitors especially, natural product based ones, are highly attractive. Coumaperine, a natural product found in white pepper and its derivatives were herein developed as 5-LOX inhibitors. We have synthesized twenty four derivatives, characterized and evaluated their 5-LOX inhibition potential. Coumaperine derivatives substituted with multiple hydroxy and multiple methoxy groups exhibited best 5-LOX inhibition. CP-209, a catechol type dihydroxyl derivative and CP-262-F2, a vicinal trihydroxyl derivative exhibited, 82.7% and 82.5% inhibition of 5-LOX respectively at 20 µM. Their IC50 values are 2.1 ±â€¯0.2 µM and 2.3 ±â€¯0.2 µM respectively, and are comparable to zileuton, IC50 = 1.4 ±â€¯0.2 µM. CP-155, a methylenedioxy derivative (a natural product) and CP-194, a 2,4,6-trimethoxy derivative showed 76.0% and 77.1% inhibition of 5-LOX respectively at 20 µM. Antioxidant study revealed that CP-209 and 262-F2 (at 20 µM) scavenged DPPH radical by 76.8% and 71.3% respectively. On the other hand, CP-155 and 194 showed very poor DPPH radical scavenging activity. Pseudo peroxidase assay confirmed that the mode of action of CP-209 and 262-F2 were by redox process, similar to zileuton, affecting the oxidation state of the metal ion in the enzyme. On the contrary, CP-155 and 194 probably act through some other mechanism which does not involve the disruption of the oxidation state of the metal in the enzyme. Molecular docking of CP-155 and 194 to the active site of 5-LOX and binding energy calculation suggested that they are non-competitive inhibitors. The In-Silico ADME/TOX analysis shows the active compounds (CP-155, 194, 209 and 262-F2) are with good drug likeliness and reduced toxicity compared to existing drug. These studies indicate that there is a great potential for coumaperine derivatives to be developed as anti-inflammatory drug.

Bacterial lipid modification of proteins requires appropriate secretory signals even for expression - implications for biogenesis and protein engineering.

Sec- and Tat-mediated bacterial lipid modification of proteins are important posttranslational processes owing to their vital roles in cellular functions, membrane targeting and biotechnological applications like ELISA, biosensor, adjuvant-free vaccines, liposomal drug delivery etc. However a better understanding of the tight coupling of secretory and lipid modification machineries and the processes associated will help unravel this essential biological event and utilize it for engineering applications. Further, there is a need for a systematic and convincing investigation into membrane targeting, solubilization and ease-of-purification of engineered lipoproteins to facilitate scientists in readily applying this new protein engineering tool. Therefore, in this study, we have investigated systematically recombinant expression, translocation, solubilization and purification of three White Spot Syndrome Viral (WSSV) proteins, ICP11, VP28 and VP281. Our study shows that the lipid modification and secretion processes are tightly coupled to the extent that mismatch between folding kinetics and signal sequence of target proteins could lead to transcriptional-translational uncoupling or aborted translation. The proteins expressed as lipoproteins through Tat-pathway were targeted to the inner membrane achieving considerable enrichment. These His-tagged proteins were then purified to apparent homogeneity in detergent-free form using single-step Immobilized Metal Affinity Chromatography. This study has interesting findings in lipoprotein biogenesis enhancing the scope of this unique post-translational protein engineering tool for obtaining pure detergent-free, membrane or hydrophobic surface-associating diagnostic targets and vaccine candidates for WSSV.

Design and characterization of stabilized derivatives of human CD4D12 and CD4D1.

CD4 is present on the surface of T-lymphocytes and is the primary cellular receptor for HIV-1. CD4 consists of a cytoplasmic tail, one transmembrane region, and four extracellular domains, D1-D4. A construct consisting of the first two domains of CD4 (CD4D12) is folded and binds gp120 with similar affinity as soluble 4-domain CD4 (sCD4). However, the first domain alone (CD4D1) was previously shown to be largely unfolded and had 3-fold weaker affinity for gp120 when compared to sCD4 [Sharma, D.; et al. (2005) Biochemistry 44, 16192-16202]. We now report the design and characterization of three single-site mutants of CD4D12 (G6A, L51I, and V86L) and one multisite mutant of CD4D1 (G6A/L51I/L5K/F98T). G6A, L51I, and V86L are cavity-filling mutations while L5K and F98T are surface mutations which were introduced to minimize the aggregation of CD4D1 upon removal of the second domain. Two mutations, G6A and V86L in CD4D12 increased the stability and yield of the protein relative to the wild-type protein. The mutant CD4D1 (CD4D1a) with the 4 mutations was folded and more stable compared to the original CD4D1, but both bound gp120 with comparable affinity. In in vitro neutralization assays, both CD4D1a and G6A-CD4D12 were able to neutralize diverse HIV-1 viruses with similar IC(50)s as 4-domain CD4. These stabilized derivatives of human CD4 can be useful starting points for the design of other more complex viral entry inhibitors.

Ligand-modulated parallel mechanical unfolding pathways of maltose-binding proteins.

Protein folding and unfolding are complex phenomena, and it is accepted that multidomain proteins generally follow multiple pathways. Maltose-binding protein (MBP) is a large (a two-domain, 370-amino acid residue) bacterial periplasmic protein involved in maltose uptake. Despite the large size, it has been shown to exhibit an apparent two-state equilibrium unfolding in bulk experiments. Single-molecule studies can uncover rare events that are masked by averaging in bulk studies. Here, we use single-molecule force spectroscopy to study the mechanical unfolding pathways of MBP and its precursor protein (preMBP) in the presence and absence of ligands. Our results show that MBP exhibits kinetic partitioning on mechanical stretching and unfolds via two parallel pathways: one of them involves a mechanically stable intermediate (path I) whereas the other is devoid of it (path II). The apoMBP unfolds via path I in 62% of the mechanical unfolding events, and the remaining 38% follow path II. In the case of maltose-bound MBP, the protein unfolds via the intermediate in 79% of the cases, the remaining 21% via path II. Similarly, on binding to maltotriose, a ligand whose binding strength with the polyprotein is similar to that of maltose, the occurrence of the intermediate is comparable (82% via path I) with that of maltose. The precursor protein preMBP also shows a similar behavior upon mechanical unfolding. The percentages of molecules unfolding via path I are 53% in the apo form and 68% and 72% upon binding to maltose and maltotriose, respectively, for preMBP. These observations demonstrate that ligand binding can modulate the mechanical unfolding pathways of proteins by a kinetic partitioning mechanism. This could be a general mechanism in the unfolding of other large two-domain ligand-binding proteins of the bacterial periplasmic space.

Mitochondrial NADH kinase, Pos5p, is required for efficient iron-sulfur cluster biogenesis in Saccharomyces cerevisiae.

In Saccharomyces cerevisiae, the mitochondrial inner membrane readily allows transport of cytosolic NAD(+), but not NADPH, to the matrix. Pos5p is the only known NADH kinase in the mitochondrial matrix. The enzyme phosphorylates NADH to NADPH and is the major source of NADPH in the matrix. The importance of mitochondrial NADPH for cellular physiology is underscored by the phenotypes of the Δpos5 mutant, characterized by oxidative stress sensitivity and iron-sulfur (Fe-S) cluster deficiency. Fe-S clusters are essential cofactors of proteins such as aconitase [4Fe-4S] and ferredoxin [2Fe-2S] in mitochondria. Intact mitochondria isolated from wild-type yeast can synthesize these clusters and insert them into the corresponding apoproteins. Here, we show that this process of Fe-S cluster biogenesis in wild-type mitochondria is greatly stimulated and kinetically favored by the addition of NAD(+) or NADH in a dose-dependent manner, probably via transport into mitochondria and subsequent conversion into NADPH. Unlike wild-type mitochondria, Δpos5 mitochondria cannot efficiently synthesize Fe-S clusters on endogenous aconitase or imported ferredoxin, although cluster biogenesis in isolated Δpos5 mitochondria is restored to a significant extent by a small amount of imported Pos5p. Interestingly, Fe-S cluster biogenesis in wild-type mitochondria is further enhanced by overexpression of Pos5p. The effects of Pos5p on Fe-S cluster generation in mitochondria indicate that one or more steps in the biosynthetic process require NADPH. The role of mitochondrial NADPH in Fe-S cluster biogenesis appears to be distinct from its function in anti-oxidant defense.

Designed biomaterials to mimic the mechanical properties of muscles.

The passive elasticity of muscle is largely governed by the I-band part of the giant muscle protein titin, a complex molecular spring composed of a series of individually folded immunoglobulin-like domains as well as largely unstructured unique sequences. These mechanical elements have distinct mechanical properties, and when combined, they provide the desired passive elastic properties of muscle, which are a unique combination of strength, extensibility and resilience. Single-molecule atomic force microscopy (AFM) studies demonstrated that the macroscopic behaviour of titin in intact myofibrils can be reconstituted by combining the mechanical properties of these mechanical elements measured at the single-molecule level. Here we report artificial elastomeric proteins that mimic the molecular architecture of titin through the combination of well-characterized protein domains GB1 and resilin. We show that these artificial elastomeric proteins can be photochemically crosslinked and cast into solid biomaterials. These biomaterials behave as rubber-like materials showing high resilience at low strain and as shock-absorber-like materials at high strain by effectively dissipating energy. These properties are comparable to the passive elastic properties of muscles within the physiological range of sarcomere length and so these materials represent a new muscle-mimetic biomaterial. The mechanical properties of these biomaterials can be fine-tuned by adjusting the composition of the elastomeric proteins, providing the opportunity to develop biomaterials that are mimetic of different types of muscles. We anticipate that these biomaterials will find applications in tissue engineering as scaffold and matrix for artificial muscles.

Recombination of protein fragments: a promising approach toward engineering proteins with novel nanomechanical properties.

Combining single molecule atomic force microscopy (AFM) and protein engineering techniques, here we demonstrate that we can use recombination-based techniques to engineer novel elastomeric proteins by recombining protein fragments from structurally homologous parent proteins. Using I27 and I32 domains from the muscle protein titin as parent template proteins, we systematically shuffled the secondary structural elements of the two parent proteins and engineered 13 hybrid daughter proteins. Although I27 and I32 are highly homologous, and homology modeling predicted that the hybrid daughter proteins fold into structures that are similar to that of parent protein, we found that only eight of the 13 daughter proteins showed beta-sheet dominated structures that are similar to parent proteins, and the other five recombined proteins showed signatures of the formation of significant alpha-helical or random coil-like structure. Single molecule AFM revealed that six recombined daughter proteins are mechanically stable and exhibit mechanical properties that are different from the parent proteins. In contrast, another four of the hybrid proteins were found to be mechanically labile and unfold at forces that are lower than the approximately 20 pN, as we could not detect any unfolding force peaks. The last three hybrid proteins showed interesting duality in their mechanical unfolding behaviors. These results demonstrate the great potential of using recombination-based approaches to engineer novel elastomeric protein domains of diverse mechanical properties. Moreover, our results also revealed the challenges and complexity of developing a recombination-based approach into a laboratory-based directed evolution approach to engineer novel elastomeric proteins.

A functional single-molecule binding assay via force spectroscopy.

Protein-ligand interactions, including protein-protein interactions, are ubiquitously essential in biological processes and also have important applications in biotechnology. A wide range of methodologies have been developed for quantitative analysis of protein-ligand interactions. However, most of them do not report direct functional/structural consequence of ligand binding. Instead they only detect the change of physical properties, such as fluorescence and refractive index, because of the colocalization of protein and ligand, and are susceptible to false positives. Thus, important information about the functional state of protein-ligand complexes cannot be obtained directly. Here we report a functional single-molecule binding assay that uses force spectroscopy to directly probe the functional consequence of ligand binding and report the functional state of protein-ligand complexes. As a proof of principle, we used protein G and the Fc fragment of IgG as a model system in this study. Binding of Fc to protein G does not induce major structural changes in protein G but results in significant enhancement of its mechanical stability. Using mechanical stability of protein G as an intrinsic functional reporter, we directly distinguished and quantified Fc-bound and Fc-free forms of protein G on a single-molecule basis and accurately determined their dissociation constant. This single-molecule functional binding assay is label-free, nearly background-free, and can detect functional heterogeneity, if any, among protein-ligand interactions. This methodology opens up avenues for studying protein-ligand interactions in a functional context, and we anticipate that it will find broad application in diverse protein-ligand systems.

Protein minimization of the gp120 binding region of human CD4.

CD4 is an important component of the immune system and is also the cellular receptor for HIV-1. CD4 consists of a cytoplasmic tail, one transmembrane region, and four extracellular domains, D1-D4. Constructs consisting of all four extracellular domains of human CD4 as well as the first two domains (CD4D12) have previously been expressed and characterized. All of the gp120-binding residues are located within the first N-terminal domain (D1) of CD4. To date, it has not been possible to obtain domain D1 alone in a soluble and active form. Most residues in CD4 that interact with gp120 lie within the region 21-64 of domain D1 of CD4. On the basis of these observations and analysis of the crystal structure of CD4D12, a mutational strategy was designed to express CD4D1 and region 21-64 of CD4 (CD4PEP1) in Escherichia coli. K(D) values for the binding of CD4 analogues described above to gp120 were measured using a Biacore-based solution-phase competition binding assay. Measured K(D) values were 15 nM, 40 nM, and 26 microM for CD4D12, CD4D1, and CD4PEP1, respectively. All of the proteins interact with gp120 and are able to expose the 17b-binding epitope of gp120. Structural content was determined using CD and proteolysis. Both CD4D1 and CD4PEP1 were partially structured and showed an enhanced structure in the presence of the osmolyte sarcosine. The aggregation behavior of all of the proteins was characterized. While CD4D1 and CD4PEP1 did not aggregate, CD4D12 formed amyloid fibrils at neutral pH within a week at 278 K. These CD4 derivatives should be useful tools in HIV vaccine design and entry inhibition studies.